Stainless U-Lift Table
The “U” shaped low profile table is ideal for handling wire baskets, containers, plastic and wooden open bottom pallets. This design allows loading with either a 21″ wide manual or electric pallet truck without the need for a loading ramp.
The Stainless Steel Galvanized Guardian U-Lift Tables have all the safety features of our Low Profile Guardian Series Lift Tables with these additional features:
- Stainless Steel Platform & Base
- Cold Galvanized Scissor Frame Assembly
- Stainless Steel Pins
- Steel-It Epoxy Cylinders
- IP55 Electrical Connections
- Remote Power Unit (RPU)
Standard Features
- Load and unload pallets without the need for a loading ramp
- Meets and exceeds both U.S. (ANSI) and EU safety standards
- Upper platform fitted with safety perimeter which prevents descent on contact
- Low-tension (24V) control box with up-down buttons
- Electric circuit reset button in case the safety perimeter is actuated
- External power pack equipped with a relief valve against overloading
- Compensated flow valve for controlling lowering speed
- External power pack is supplied with 8′ long hoses
- Upper limit switch
- Designed for use with a 21″ wide pallet jack
- 115 voltage single phase standard
- 230/460 voltage three phase available
- Single acting cylinders with drainage system
- Check valve to stop the lift table lowering in case of hose burst
- Safety clearance between scissors to prevent trapping during operations
- Mechanical blocks for safe maintenance operations
- Self-lubricating bushings on pivot points
- Removable lifting eye(s) to facilitate installation of the lift table
Options
- Stainless Power Box
- Foot Controls
Specifications
Model | Vertical Travel |
Capacity | Height | Platform Size |
Base Frame |
Up Speed |
|
---|---|---|---|---|---|---|---|
Lower | Upper | ||||||
LPBLU-20-SG | 30.75″ | 2,200 lbs | 3.13″ | 33.88″ | 50″ x 55.88″ | 42″ x 52″ | 18 sec |
LPBLU-30-SG | 29.5″ | 3,300 lbs | 3.63″ | 33.88″ | 45.63″ x 59.88″ | 43″ x 56.25″ | 25 sec |